Product Information

At Frshslabs we're tired of single-use air fresheners that don't suit your car or lifestyle. Each slab is custom made using solid wood and re-scentable, so you can stay forever frsh, just the way you like!

We care about our planet as much as we care about our cars. Therefore we made sure each frshslab is biodegradable and sustainable.

*Even though frshslabs are biodegradable, please dispose properly and with care.

Engraving: All Frshslabs are engraved on both sides, for a high end look! Whenever possible, we ensure text remains legible on either side.

*Some slabs will be mirrored, if they are asymmetric in shape.

Wood: We offer three different types of wood; Cedar (Light), Cherry (Medium), and Walnut (Dark). All our wood comes from local sawmills and we primarily use cut-off's that would otherwise get thrown out. This way we reduce waste and the impact on our planets resources.

Hanging String: Each type of wood comes with a different color leather string, to perfectly match the finish of your frshslab. No artificial color is used and our leather is locally sourced.

Scent Oil: All our oils are paraben free and vegan friendly. Our fragrances are a sophisticated blend of natural, nature identical, and aromatic materials. They are not tested on animals or contain any animal derivatives.

A frshslab typically holds it's scent 4 to 8 weeks, depending on; how sensitive you are to the fragrances, the ambient temperature, if you often drive with the windows down, or the size of your car.

Some say it only lasts 3 weeks, others report 10+ weeks. Regardless, re-scenting your frshslab is easy!

Remove the frshslab from your car, to make sure you don't drip oil in unwanted areas. From here you have two options: either lay it on a flat surface with a napkin underneath, or place it in a plastic bag. Apply 5 - 10 drops on your frshslab, until evenly coated - You can add more or less oil to your liking. Once the wood completely absorbs the oil, or is saturated, you're ready to hang it back in your car.

Note: Avoid excess oil on your frshslab. Use a napkin to pat the wood dry as needed, before hanging it back in your car!

Remove the puck from your car, to make sure you don't drip oil in unwanted areas. With the lid open, squirt 5 - 10 drops onto the wood. That's it, you're ready to place it back in your car.

Note: Avoid placements slanted more than 45* or inverting your frshslabs puck, so that oil within does not seep into unwanted areas.

Remove the clip from your car, to make sure you don't drip oil in unwanted areas. Lay your frshslabs clip on a flat surface with the wood / design side up and place a napkin underneath. Apply 5 - 10 drops on your frshslab, until evenly coated - You can add more or less oil to your liking. Once the wood completely absorbs the oil, or is saturated, you're ready to place it back in your car.

Note: Avoid excess oil on your frshslab. Use a napkin to pat the wood dry as needed. Ensure the back of your frshslabs clip is free of oil before placing it back on the magnet!